Have you constantly asked why you need to dive into the hassle of cleaning your dryer vent? If you have asked yourself this, you may have already found the answer; yes, it is necessary. This is because your dryer collects the lint from the clothes you dry, and with this in mind, you can easily conclude why having a dryer cleaned eliminates the chances of fires.
Lint is easily swallowed by fire and is also a good catalyst in building one when introduced to heat. If you think it through, I explain what happens when a dryer heats things with an accumulated lint in them. To avoid the chances of bigger damage caused by a fire incident, it will not hurt to clean your dryer vent.
However, have you tried installing one yourself? If you are curious to discover how it is done and try the task yourself, you can follow some easy steps.
- Make space between the wall and the dryer
A dryer has a power cord that enables it to turn on. To secure your safety in the process, ensure that the dryer is not plugged in a power source. If you have a dryer powered by introducing gas, make sure that the valve is closed.
Grab a screwdriver and unscrew the vent from the exhaust port of the connection. After this, pull the dryer’s vent away from the outlet and make sure to grab a vacuum to get rid of any lint accumulated. This will help secure any fire concerns in the future. Next, locate the vent that connects the dryer and the duct from the exterior of your home as well, and make sure to clean using the vacuum you have with you.
- Tighten clamp
To make sure everything is tight and sealed while securing the vent in place, use the screwdriver to tighten up the clamp. This will help to secure everything in place.
- Attach periscope
If you have your eyes on the periscope, make sure to grab its upper part and lift it until it is just inches away from the back of your dryer. If you have an electric-powered dryer, plug the cord and if you have a gas source, turn on the valve and after this, secure your dryer’s back on the wall.
- Use a kit t connect the vent and duct
The vent and ducts are very important because it is the pathway of your dryer to the exterior vent. As you use the kit, make sure that you attach the lower part of the vent to the periscope of the vent. Moreover, make sure to tighten the clamp in the process.
- Use a 90-degree elbow
The 90-degree elbow is the connection that secures contact between the overhead duct and the band clamp. As you do this, tighten the clamp afterward.
Connect the lower part of the flex of the vent and the upper vent. Make sure the two meets between your dryer and your home’s ceiling. Again, you don’t have to worry about the fit because it is designed to lock quickly and securely. This time, you won’t have to secure tightening the clamp.
Are you dizzy by reading the steps? Well, don’t worry, you can say go the easier route. Grab the help of Dryer vent Installation Des Moines through the website.